Adjustment When Camera Ass'y Is Exchanged; Adjustment When Head Optical Ass'y And Ccd Flex Board Are Exchanged; Notes Of Adjustment - Panasonic AG-HPX500 Service Manual

3-3. Adjustment when CAMERA Ass'y is exchanged

1. Start up the Camera Adjustment software by double-clicking "Camera Adjustment Software.exe". The
Camera Adjustment screen is displayed.
2. The "Execute" button is clicked on the Camera Adjustment screen. Video/Frequency Adj. screen is
displayed.
3. Click "Exit" button on the Video/Frequency Adj. screen.
4. The message "Adjustment Starts. Shoot White Chart." is displayed on the Camera Adjustment screen.
5. Please perform the adjustment according to the content of item "2-4. Auto adjustment" and "2-5. ND FILTER
compensation".
3-4. Adjustment when Head Optical Ass'y and CCD FLEX board are
exchanged
The adjustment procedure is same as the camera ass'y exchange.

4. Notes of adjustment

When the adjustment fails during the auto adjustment, the "Execute" button becomes effective. Clicking
"Execute" button on the Camera Adjustment screen, Video/Frequency Adj. screen is displayed.
In this case, because the adjustment shown in item 2-3 is completed, the "Exit" button is clicked on the
Video/Frequency Adj. screen. Clicking "Execute" button again on the Camera Adjustment screen to start the
auto adjustment.
Clicking "Execute" button on the Camera Adjustment
screen to start the auto adjustment.
Indicates as NG
"Execute" button is becomes effective.
Click "Execute" button.
Click "Exit" button,
ELE-14