Software Version Display - Panasonic AG-HPX500 Service Manual

3-1. DIAGNOSTIC menu

3-1-1. Software Version Display

Each software version can be confirmed at items "SOFT VERSION" and "EEPROM VERSION" in DIAGNOSTIC
menu.
NOTE 1: The item of "SOFT VERSION" is not displayed in the MCR mode.
NOTE 2: The version of each software and EEPROM can be confirmed also with the Setting Tool screen (PC EVR
software) and GUI service menu. Please refer to item "6-4-4. Software Version Display" (page INF-28)
and item "4-3. VERSION" (page INF-14).
Type
CAM MICON
Microprocessor
SYS MICON
P2CS OS
P2CS AP
FLASH CAM FPGA
CAM BE FPGA
SYS FPGA
CAM
EEPROM
SYS
SOFT VERSION
Use the JOG dial button (or the Up and Down cursor buttons) to select the "SOFT VERSION". And press the
JOG dial button (or the SET button).
DIAGNOSTIC MENU
SOFT VERSION
EEPROM VERSION
1394 DIAG
1394 UID
OPERATION
PUSH MENU TO RETURN
SOFT VERSION
CAM MICON
SYS MICON
PSCS OS
PSCS AP
CAM FPGA
CAMBE FPGA : 1.00-00-0.00
SYS FPGA
PUSH MENU TO RETURN
Name on display
---- ----
YES ----
----
----
00000H
: 1.04-00-0.00
: 1.04-00-0.00
: 1.02-00-0.00
: 1.03-00-0.00
: 1.03-00-0.00
: 2.08-00-0.00
Ref No.
IP1005
IP305
IP202(SH4)
IP203(SH4)
IP403
IP700
IP1002､IP1004､IP1015
IP306
Select "YES" and press JOG dial button
(or the SET buttons) to move the SOFT
VERSION display screen.
INF-6
Board
CAMERA
CODEC
CODEC
CAMERA
CODEC
CAMERA
CODEC