Panasonic AG-HPX500 Service Manual page 56

< PROCEDURE 2 >
Write the Scene file data to SD memory card.
Write the Setting menu data (USER FILE) to SD memory card.
Confirm that the CAC files saved on the camera recorder.
The files saved can be confirmed by select the item of CAC FILE DELETE on the LENS
SETUP menu. (LENS SETUP menu → CAC FILE DELETE)｡
NOTE: It is only the check of files. Please do not delete a file.
CODEC Board is exchanged
NOTE: An abnormal screen might be displayed (In case of the SYSTEM FREQ. set to the
CODEC side and the SYSTEM FREQ. on the CAMERA side are the disagreements.).
Turn the power OFF and ON (Normal screen is displayed.).
*NOTE
Confirm that the software version.
･ SYS MICON
･ P2CS OS ･ P2CS AP
･ SYS FPGA ･ SYS EEPROM
Be the latest version.
(Refer to Global Service WEB Site
about number of latest version.)
( It continues to next page. )
Turn the power ON.
YES
*NOTE:
Regarding version confirmation about
SYS MICON and P2CS OP/AP, refer to
item "5. Firmware update procedure"
(page INF-17).
NO
Update to latest version.
*The SYS FPGA and SYS EEPROM
do not required update.
Refer to item "5. Firmware update
procedure on page INF-17 about update
procedure.
INF-46