Option Menu; 1394 Status Display - Panasonic AG-HPX500 Service Manual

3-3. OPTION menu

3-3-1. 1394 STATUS Display

Use the JOG dial button (or the Up and Down cursor buttons) to select the "1394 STATUS". And press the JOG
dial button (or the SET button).
OPTION MENU
1394 STATUS
1394 CONFIG
PUSH MENU TO RETURN
ITEM RANGE & SET VALUE
DV
PRO25
PRO50
FORMAT
HD100
UNKWN
No display
1x
2x
RATE
4x
No display
60HZ
N/P 50HZ
No display
0-63
CH
No display
S100
S200
SPEED
S400
No display
STOP
OK
STATUS
NOPKT
UNKWN
OK
VIDEO UNKWN
No display
OK
AUDIO UNKWN
No display
Select "YES" and press JOG dial button (or the
----
----
SET buttons) to move the 1394 STATUS display
YES
----
screen.
PRESET
Format information of the digital input and output signal.
DV
PRO25 : DVCPRO25 (25M)
----- PRO50 : DVCPRO50 (50M)
HD100 : DVCPROHD (100M)
UNKWN : The un-corresponding format
No display : No received data & POWER SAVE condition etc.
Transfer speed of the digital input and output signal.
1x : 1 time speed
----- 2x : twice of speed
4x: 4 times of speed
No display : No received data & POWER SAVE condition etc.
NTSC or PAL information of the received data or transmitted.
60HZ: NTSC
-----
50HZ: PAL
No display : No received data & POWER SAVE condition etc.
Current channel number of the received data or transmitted.
-----
No display: No received data condition etc..
Transfer rate of the digital input and output signal.
----- S100: 100Mbps, S200: 200Mbps, S400: 400Mbps
No display: No received data & POWER SAVE condition etc..
Status of the received data or transmitted.
STOP: No transmitted
OK: data transmitted or received normally
----- NOPKT: packet is not received at received condition
UNKWN: INPUT: data received normally, but the packet have
Status of the video data received or transmitted.
OK: received or transmitted normally
-----
UNKWN: It can not be received or transmitted normally
No display: No received data & POWER SAVE condition etc..
Status of the audio data received or transmitted.
OK: received or transmitted normally
-----
UNKWN: It can not be received or transmitted normally
No display: No received data & POWER SAVE condition etc..
INF-11
Setting contents and outline function explanation
: DV(DVCAM)
problem
OUTPUT: data can not be transmitted