Table of Contents
Advertisement
Camera Recording
* Connect the Palmcorder to a power source.
* Insert a cassette with record tab (see page 10).
I Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
PAUSE
Record/Pause
mode.
2 With the Viewfinder Eye Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
3 Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
recording.
The Tally Lamp and REC Indicator are
lit during recording.
WARNING:
* Do not leave the Palmcorder with the EVF
aimed directly at the sun as this may cause
RECORD
damage to the internal parts of the EVF.
ve
T
Press the RECORD/PAUSE again to
AN
pause the recording.
\ Va
Set the Power switch to OFF after
recording is finished.
* To remove the cassette
1
D
In Record/Pause mode, slide the TAPE EJECT
Š ar
switch (refer to page 10).
* When your Palmcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a normal
characteristic of the CCD pick-up device. Try
to avoid this when possible.
20
Advertisement
Table of Contents
