Table of Contents
Advertisement
NV-GS150E / NV-GS150EG / NV-GS150EB / NV-GS150EP / NV-GS150GC / NV-GS150GN / NV-GS150GCD / NV-GS140E / NV-GS140EG / NV-GS140EB / NV-GS140EP / NV-GS158GK
9.2.
SERVICE MENU
When abnormal detection contents are confirmed a When I do the following operation automatic diagnosis cord is
displayed. (Service mode)
This function displays the following items in the Service Menu.
· *1 ... Mechanism lock code record
The current lock code, the last lock code and the lock code before last are displayed.
· *2 ... Lens motor lock code record
The current lock code, the last lock code and the lock code before last are displayed.
Making the mode dial of This Machine a PC connection mode push [QUICK START] button and [JOYSTICK LEFT
and [PHOTO SHOT] button simultaneously for 3 seconds (with no SD Card inserted).
The Service Menu will be displayed.
NOTE:
In the case that a tape or SD Card is included the above operation does not work.
Self diagnosis cord contents are as follows
Display position → Cord specification
Display contents(Self diagnosis cord contents)
Turn off the power supply after confirmation,
Please do the error cord backup record the clear after repair completion.
CLEAR METHOD
If the Card and Tape inserted, take out it before Service Mode operation.
Making the mode dial of This Machine a pc connection mode push [QUICK START] button and [JOYSTICK LEFT
button and [RECORDING START/STOP] button simultaneously for 3 seconds.
NOTE:
1. When an Error Display "PUSH THE RESET SWITCH" on the monitor, it is not necessary to push the MENU button to
enter the Service Menu.
2. Do not operate items 1 ~ 8 (Except for 3) in the Service Menu.
3. To exit the Service Menu, unplug the AC Cord.
Mechanism & Lens motor lock code
DISPLAY
01
T-REEL LOCK
02
S-REEL LOCK
03
UNLOADING LOCK
04
LOADING LOCK
05
CYLINDER
51
ZOOMMOTOR LOCK
52
FOCUSMOTOR LOCK
CONDITION
35
] button
]
Advertisement
Table of Contents
