Operation Display - Mitsubishi Electric FR-A701 Instrucion Manual

appears...Why?
appears...Why?
(2) Parameter verification
Whether same parameter values are set in other inverters or not can be checked.
Operation
1.
Replace the operation panel on the
inverter to be verified.
• Replace it during a stop.
2.
Screen at powering on
The monitor display appears.
3.
Press to choose the parameter
setting mode.
4.
Turn until
appears.
5.
Press to read the currently set
value.
" "(initial value) appears.
6.
Turn to change it to the set value
" "(parameter copy verification mode).
7.
Press to read the parameter setting
of the verified inverter to the operation panel.
• If different parameters exist, different
parameter numbers and
• Hold down
8.
It there is no difference, "
flicker to complete verification.
REMARKS
When the copy destination inverter is not the FR-A701 series, "model error (
flickers ... Why?
Set frequencies, etc. may be different. Check set frequencies.
Parameter read error. Perform operation from step 3 again.
Parameter write error. Perform operation from step 8 again.
(parameter copy)
flicker.
to verify.
" and " "
Flicker ··· Parameter verification complete!!
Operation panel (FR-DU07)
Display
The parameter
number read
previously appears.
Flickers for about 30s
Flickering
)" is displayed.
4
55