Download  Print this page

Advertisement

Reinstallation of the front cover
1) Insert the two fixed hooks on the left side of the
front cover 2 into the sockets of the inverter.
3) Fix the front cover 2 with the installation screws.
REMARKS
· For the 55K, the front cover 1 is separated into two parts.
CAUTION
1. Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front cover.
2. The same serial number is printed on the capacity plate of the front cover and the rating plate of the inverter. Before
reinstalling the front cover, check the serial numbers to ensure that the cover removed is reinstalled to the inverter from where
it was removed.
2) Using the fixed hooks as supports, securely press the
front cover 2 against the inverter.
(Although installation can be done with the operation
panel mounted, make sure that a connector is
securely fixed.)
Front cover 2
Front cover 2
Method of removal and reinstallation of
Front cover 2
4) Fix the front cover 1 with the installation
screws.
Front cover 1
the front cover
1
5

Advertisement

Table of Contents

   Also See for Mitsubishi Electric FR-A701

   Related Manuals for Mitsubishi Electric FR-A701

Comments to this Manuals

Symbols: 0
Latest comments: