Check and clear of the faults history
(2) Clearing procedure
POINT
· The faults history can be cleared by setting "1" in Er.CL Faults history clear.
1.
Screen at powering on
The monitor display appears.
2.
Press
setting mode.
3.
appears.
4.
Press
"
"(initial value) appears.
5.
Turn
setting value " ".
6.
Press
158
Operation
to choose the parameter
to read the currently set value.
to change it to the
to set.
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Display
Flicker ··· Faults history clear complete!!
The parameter
number previously
read appears.