Ieee Command Groups; Table F-5 Ieee Command Groups - Keithley 6514 Instruction Manual

F-12 IEEE-488 Bus Overview

IEEE command groups

Command groups supported by the Model 6514 are listed in Table F-5. Common commands
and SCPI commands are not included in this list.
Table F-5
IEEE command groups
HANDSHAKE COMMAND GROUP
UNIVERSAL COMMAND GROUP
ADDRESS COMMAND GROUP
LISTEN
TALK
ADDRESSED COMMAND GROUP
STATUS COMMAND GROUP
NDAC = NOT DATA ACCEPTED
NRFD = NOT READY FOR DATA
DAV = DATA VALID
ATN = ATTENTION
DCL = DEVICE CLEAR
IFC = INTERFACE CLEAR
REN = REMOTE ENABLE
SPD = SERIAL POLL DISABLE
SPE = SERIAL POLL ENABLE
LAG = LISTEN ADDRESS GROUP
MLA = MY LISTEN ADDRESS
UNL = UNLISTEN
TAG = TALK ADDRESS GROUP
MTA = MY TALK ADDRESS
UNT = UNTALK
OTA = OTHER TALK ADDRESS
ACG = ADDRESSED COMMAND GROUP
GTL = GO TO LOCAL
SDC = SELECTIVE DEVICE CLEAR
RQS = REQUEST SERVICE
SRQ = SERIAL POLL REQUEST
STB = STATUS BYTE
EOI = END