Keithley 6514 Instruction Manual page 232

17-12 SCPI Reference Tables
Table 17-7 (cont.)
SYSTem command summary
Command
:LOCal
:REMote
:RWLock
Note: Clearing the error queue - Power-up and *CLS clears the error queue. *RST, SYSTem:PRESet, and STATus:PRESet have no
effect on the error queue.
Table 17-8
TRACe command summary
Command
:TRACe|:DATA
:DATA?
:CLEar
:FREE?
:POINts <n>
:ACTual?
:POINts?
:FEED <name>
:CONTrol <name>
:CONTrol?
:FEED?
:TSTamp
:FORMat <name>
:FORMat?
Note: SYSTem:PRESet and *RST have no effect on the commands in this subsystem. The listed defaults are power-on defaults.
Description
RS-232 interface:
Take Model 6514 out of remote (RS-232 only).
Put Model 6514 in remote (RS-232 only).
Enable or disable local lockout (RS-232 only).
Description
Use :TRACe or :DATA as root command.
Read the contents of the buffer (data store).
Clear readings from buffer.
Query bytes available and bytes in use.
Specify size of buffer; 1 to 2500.
Query number of readings stored in buffer.
Query buffer size.
Select source of readings for buffer; SENSe[1],
CALCulate[1], or CALCulate2.
Select buffer control mode; NEXT or NEVer.
Query buffer control mode.
Query source of readings for buffer.
Timestamp:
Select timestamp format; ABSolute or DELta.
Query timestamp format.
Default
parameter Ref SCPI
Sec 12
Default
parameter Ref SCPI
√
(see Note) Sec 8
√
√
√
100
√
SENS1 √
NEV √
√
√
ABS