Options And Accessories - Keithley 6514 Instruction Manual

Options and accessories

Input cables, connectors and adapters
Model 237-ALG-2 — This is a 6.6 ft (2-meter) low-noise triax cable terminated with a 3-slot
male triax connector on one end and 3 alligator clips on the other. (One Model 237-ALG-2 is
included).
Model 237-BNC-TRX adapter — This is a male BNC to 3-lug female triax connector
(guard disconnected). It is used to terminate a triax cable with a BNC plug.
Model 237-TRX-T adapter — This is a 3-slot male to dual 3-lug female triax tee adapter for
use with 7078-TRX triax cables.
Model 237-TRX-TBC connector — This is a 3-lug female triax bulkhead (internal mount)
connector with cap for assembly of custom test fixtures and interface connections.
Model 7078-TRX-TBC connector — This is a 3-lug female triax bulkhead (external mount)
connector with cap for assembly of custom test fixtures and interface connections.
Model 7078-TRX-3, 7078-TRX-10 and Models 7078-TRX-20 triax cables — These are
low noise triax cables terminated at both ends with 3-slot male triax connectors. The -3 model
is 3 ft (0.9m) in length, the -10 model is 10 ft (3m) in length, and the -20 model is 20 ft (6m) in
length.
CS-751 barrel adapter — This is a barrel adapter that allows you to connect two triax cables
together. Both ends of the adapter are terminated with 3-lug female triax connectors.
GPIB and trigger link cables and adapters
Models 7007-1 and 7007-2 shielded GPIB cables — Connect Model 6514 to the GPIB bus
using shielded cables and connectors to reduce electromagnetic interference (EMI). Model
7007-1 is lm long; Model 7007-2 is 2m long.
Models 8501-1 and 8501-2 trigger link cables — Connect Model 6514 to other instruments
with Trigger Link connectors (e.g., Model 7001 Switch System). Model 8501-1 is lm long;
Model 8501-2 is 2m long.
Model 8502 trigger link adapter — Lets you connect any of the six trigger link lines of
Model 6514 to instruments that use the standard BNC trigger connectors.
Model 8503 DIN to BNC trigger cable — Lets you connect trigger link lines one (Voltmeter
Complete) and two (External Trigger) of Model 6514 to instruments that use BNC trigger con-
nectors. Model 8503 is lm long.
Getting Started 1-3