Keithley 6514 Instruction Manual page 227

Table 17-4 (cont.)
SENSe command summary
Command
:ULIMit <NRf>
:ULIMit?
:LLIMit <NRf>
:LLIMit?
:AUTO?
:DAMPing <b>
:DAMPing?
:RESistance
:NPLCycles <NRf>
:NPLCycles?
:RANGe
[:UPPer] <NRf>
[:UPPer]?
:AUTO <b>
:ULIMit <NRf>
:ULIMit?
:LLIMit <NRf>
:LLIMit?
:AUTO?
:GUARd <b>
:GUARd?
:CHARge
:NPLCycles <NRf>
:NPLCycles?
:RANGe
[:UPPer] <NRf>
[:UPPer]?
:AUTO <b>
Description
Select autorange upper limit; -0.021 to
0.021 (amps).
Query upper limit for autorange.
Select autorange lower limit; -0.021 to 0.021
(amps).
Query lower limit for autorange.
Query state of autorange.
Enable or disable current damping.
Query state of damping
Path to configure ohms function:
Set integration rate in line cycles (PLC); 0.01 to
10.
Query NPLC.
Configure measurement range:
Select range; 0 to 2.1e11 (ohms).
Query range value.
Enable or disable autorange.
Select autorange upper limit; -2.1e11 to
2.1e11 (ohms).
Query upper limit for autorange.
Select autorange lower limit; -2.1e11 to
2.1e11 (ohms).
Query lower limit for autorange.
Query state of autorange.
Enable or disable driven guard.
Query state of driven guard.
Path to configure coulombs function:
Set integration rate in line cycles (PLC); 0.01 to
10.
Query NPLC.
Configure measurement range:
Select range; -21e-6 to 21e-6 (coulombs).
Query range value.
Enable or disable autorange.
SCPI Reference Tables
Default
parameter Ref
2.1e-2
2.1e-11
OFF Sec 4
6 (60Hz) Sec 6
5 (50Hz)
Sec 6
2.1e5
(see Note)
2.1e11
2.1e3
OFF Sec 3
6 (60Hz) Sec 6
5 (50Hz)
Sec 6
2.1e-6
(see Note)
17-7
SCPI
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√