Keithley 6514 Instruction Manual page 28

System electrometer
Hide thumbs Also See for 6514:
Table of Contents

Advertisement

1-6
Getting Started
Shifted
V-DROP
AUTO-DIS
GPIB
RS-232
Middle Row
Unshifted
AVG
MEDN
REL
LIMIT
DIGIT
RATE
and
Shifted
MX+B
%
VAL
CONF-LIM
UNITS
NPLC
Bottom Row
Unshifted
STORE
RCLL
DELAY
DAMP
HALT
TRIG
EXIT
ENTER
Shifted
TEST
CAL
SAVE
SETUP
CONF-ARM
CONF-TRIG
3 Range keys
AUTO
Enables/disables V-drop measurements for Ω function.
Sets and enables/disables Auto Discharge for charge measurements.
Configures and enables/disables GPIB interface.
Configures and enables/disables RS-232 interface.
Configures and enables/disables digital filter.
Configures and enables/disables median filter.
Enables/disables Relative (Rel).
Performs configured limit tests.
Sets display resolution.
Selects measurement rate.
Controls cursor position for making selections or editing values.
Configures and enables/disables mX+b math function.
Configures and enables/disables Percent math function.
Sets Rel value and enables Rel.
Configures limit tests.
Selects engineering units for scientific notation for display readings.
Set rate by setting PLC value.
Sets the number of readings to store and enables the buffer.
Displays stored readings (including maximum, minimum, peak-to-peak, average,
and standard deviation). The
or
key toggles between reading number and reading.
Sets user delay between trigger and measurement.
Enables/disables damping for current measurements.
Stops measurement process. Puts 6514 in idle state.
Trigger measurement(s). Takes 6514 out of idle state.
Cancels selection, moves back to measurement display.
Accepts selection, moves to next choice or back to measurement display.
Performs key-press test or display test.
Accesses calibration.
Saves present setup to a memory location.
Restores setup stored in a memory location, or to GPIB or factory defaults.
Configures Arm Layer of trigger model.
Configures Trigger Layer of trigger model.
Selects the next higher voltage measurement range.
Selects the next lower voltage measurement range.
Enables/disables autorange.
and
range keys scroll through the buffer, and the

Advertisement

Table of Contents
loading

Table of Contents