Alarm; Enabling / Disabling System Buzzers; Enabling / Disabling Motion Detection; Enabling / Disabling Video Loss Alarms - Lorex LH330 Edge2 Series Instruction Manual

Alarm

The Alarm Menu allows you to
configure settings for alarms
and motion detection. It also allows you
to enable and disable the system
buzzers.
Alarm Menu
To access the Alarm Menu, click
Enabling / Disabling System
Buzzers
The DVR has two buzzer options, a
system buzzer and a key buzzer. The
system buzzer beeps during alarms,
motion events, and system events. The
key buzzer beeps when buttons are
pressed.
To enable / disable system buzzer:
1 From the Alarm Menu, click Buzzer. Scroll
up / down and select O to enable the
system buzzer or select X to disable it.
2 Right-click to save your changes and
return to the Main Menu.
To enable / disable the key buzzer:
1 From the Alarm Menu, click Key Buzzer.
Scroll up / down and select O to enable the
key buzzer or select X to disable it.
2 Right-click to save your changes and
return to the Main Menu.
Enabling / Disabling Motion
Detection
1 From the Alarm Menu, click Motion Enable
under the camera that you wish to
configure.
2 Scroll up / down and select O to enable
motion detection or X to disable it.
3 Right-click to save your changes and
return to the Main Menu.
Enabling / Disabling Video Loss
Alarms
Video loss alarms occur when cameras
are disconnected or suffer a loss of
video. The DVR employs a pre-record
function to capture video from seconds
before the video loss occurred.
then .
To enable / disable video loss alarms:
1 From the Alarm Menu, click Video Loss
Alarm under the camera you wish to
configure.
2 Scroll up / down and select O to enable the
video loss alarm or X to disable it.
3 Right-click to save your changes and
return to the Main Menu.

Configuring Alarm Settings

1 From the Alarm Menu, click Alarm Setup.
The Alarm Setup Menu opens.
Alarm Setup Menu
Using the Main Menu
36