Using the Feature
Understanding Related Programming
Program 12
Program 17
Program 16
Program 18 (II)
Program 4
Program 10
Part I: DIGITAL SYSTEM Features
N/A
To make DILs (DTD + # + Extension number + #) (i.e., to
directly terminate a line to an extension, UCD master
extension, or Ring Group)
To assign a DIL to a key at an extension (LK + Line
number 01-16 + #). If you do not assign it to a key, it
rings a Loop key.
To give an extension (other than the terminated extension)
access to the DIL so they can answer it if it diverts to their
extension (L + Line no. 01-16 + # + 01 or 02 + #)
To assign ringing to the DIL at extensions other than the
terminated extension (RA or DRA + # + Y or N + #)
To set the Rings Before Recall timer (Timer 06 + # +
Duration + # - how long a DIL rings an idle/busy
terminated extension or a UCD overflow extension before
diverting to key ring; and, how long a DIL rings a Hunt
Group extension before going to the next Hunt Group
extension)
To set the Camp-On timer (Timer 03 + # + Duration + # -
how long a DIL rings a busy UCD group before going to
the overflow extension)
To assign names to the DILs (See line name programming
on page 230)
Direct Inward Lines
65