Table of Contents
Advertisement
Program 18: Extension Features (I)
Filling Out the Program Record Form
Example
Extension 305 has Do Not Disturb disabled (no other options will be shown).
Ext.
3 0 5
N
Entering Data Into Memory
To enter Program 18 (Part
I) data:
260
Enter program mode.
1.
-Press # + dial SP + dial 5312 + press #.
Press key 18 (CONF key) to enter Program 18.
2.
Dial extension number, press #.
3.
Dial abbreviation for desired feature, press #.
4.
-To dial PZ: Dial P, then 0 (zero).
To accept the displayed data: Press #.
5.
OR
To change or enter data: Dial data, press #.
-To erase a data entry before you press #: Dial *.
-To accept the SO (station operator) data, you may
have to press SAVE instead.
Repeat steps 4-5 for all features.
6.
Press SAVE.
7.
OR
Enter Program 18 (Part II) data for the same extension
as follows: Go to step 4 in the procedures for Program
18 (Part II).
Select an option:
8.
To enter data for another extension: Dial Y, then go to
step 3.
OR
To exit Program 18: Press SAVE once.
OR
To exit the program mode: Press SAVE twice.
-To enter another program after exiting: Press its
key.
DIGITAL SYSTEM Administrator's Guide
Extension Options
0 1 8 5 3 I 8 ( D )
Advertisement
Table of Contents
