Table of Contents
Advertisement
Intercom
To answer an Intercom
call that comes over your
speaker (you hear two
short beeps):
To answer an Intercom
call that rings your phone:
To enable/disable
voice-announced
Intercom calls when your
extension has program
access level 3-5:
Understanding Related Programming
Program 2
Program 18 (II)
104
Press ICM (except at an ESL set).
2.
-ICM lights and you hear dial tone.
-To force the call to ring the extension, dial 1 before
dialing the extension number in step 3.
Dial extension (300-347).
3.
OR
Dial 0 for main attendant or 01-04 for other attendants.
-ICM flashes fast when the call goes through.
-You cannot call your attendant during the Night
Answer mode.
If you hear ringing, wait for an answer.
4.
OR
If you hear two beeps, you can speak right away.
Speak toward the phone.
1.
If you hear two long beeps, this means one of two
things:
-The microphone is off (see page 116). Turn it on or
lift the handset to speak.
-Handsfree Reply is disabled. Lift the handset to
speak.
If you are an attendant, the HF key flashes slowly. If you
are not an attendant, ICM flashes slowly.
Lift handset.
1.
-ICM flashes fast.
Press HF (if you are the attendant).
2.
You can do this only if the system is programmed for
voice-announced Intercom calls.
Do not lift handset.
1.
Press #.
2.
Dial VA.
3.
Dial Y to enable voice-announced calls.
4.
OR
Dial N to disable voice-announced calls (i.e., to enable
ringing calls).
Press SAVE.
5.
To enable/disable voice-announced Intercom calls
system-wide (VOICE CALLS = Y or N + #)
To enable/disable Handsfree Reply system-wide (HF
REPLY + Y or N + #)
To enable/disable voice-announced Intercom calls for
specific extensions (VA + # + Y or N + #). The system
DIGITAL SYSTEM Administrator's Guide
Advertisement
Table of Contents
