Automatic Ringdown - Nitsuko Digital System DS Administrator's Manual

Automatic Ringdown

Call for information (for example, a reservation desk) just by
lifting the handset.
Automatic Ringdown requires an AUX Module with software version 02.10 or higher.
Automatic Ringdown is not available with Base software.
With Automatic Ringdown, an ESL or 2500 set user (connected to an ASI or Dual
OPX/ASI module) automatically calls a programmed destination when they lift the
handset. This would be helpful, for example in an airline terminal with dedicated
reservation phones. As soon as the caller lifts the handset, the phone rings the
reservation desk. The ringdown phone cannot access any system features (e.g.,
cannot dial digits). The ringdown phone can, however, receive calls.
Initial Configuration
Automatic Ringdown disabled.
Using the Feature
To use Automatic
Ringdown:
Understanding Related Programming
Refer to the DIGITAL SYSTEM Feature and Terminal Programming Manual.
Part I: DIGITAL SYSTEM Features
Lift handset.
1.
-You hear two beeps or ringing. If you hear ringing,
wait for the called party to answer. If you hear two
beeps, you may begin speaking.
Automatic Ringdown
39