Table of Contents
Advertisement
Extension Options
To delete a member of a
Circular/Terminal Group:
To add a member to a
Circular or Terminal
Group:
Part II: DIGITAL SYSTEM Programs
Program 19: Hunt Groups
Select an option:
7.
To program another group: Press # until you see
HUNT TYPE -, then go to step 3 (in any Program 19
procedure).
OR
To exit Program 19: Press SAVE once.
OR
To exit the program mode: Press SAVE twice.
-To enter another program after exiting: Press its
key.
Enter program mode.
1.
-Press # + dial SP + dial 5312 + #.
On a Multibutton phone, press key 19 (MIC/DND key)
2.
to enter Program 19.
Dial 01, 02, or 03 to let the system know you want Cir-
3.
cular or Terminal Hunt, not UCD.
-It doesn't matter which of the three numbers you
dial.
Dial first Member Ext. in group, press #.
4.
Press # until you see the extension you want to delete.
5.
If the extension is the last extension in a Terminal
6.
Hunt: Dial 300, press #.
OR
If the extension is in the middle of the group: Dial the
extension that comes after it, press #.
If the group is 304, 305, 306 and you want to delete
305:
-Press # until you see 305 (as explained in step 5).
-Dial 306, press # (as explained in step 6).
Continue as follows:
7.
-Press # until you see HUNT TYPE - .
-Dial 01, 02, or 03, press #.
-Dial the extension you just deleted, press #.
-Dial 00 for Hunt Type, press #.
Press SAVE until you exit the program mode.
8.
Enter program mode.
1.
-Press # + dial SP + dial 5312 + press #.
On a Multibutton phone, press key 19 (MIC/DND) to
2.
enter Program 19.
Dial 01, 02, or 03 to let the system know you want Cir-
3.
cular or Terminal Hunting, not UCD Hunt.
-It doesn't matter which of the three numbers you
dial.
Dial first Member Ext., press #.
4.
Press # until you see the extension before which you
5.
want to add an extension.
275
Advertisement
Table of Contents
