Table of Contents
Advertisement
Extension Options Program 18: Extension Features (II)
For System Speed Dial (SD):
Across from this heading . . .
Bin
Example
In an 8-Line system, extension 307 has immediate Day/Night ringing on lines 1-5
(no other options will be shown).
Ext.
3 0 7
RA (Ringing Assign.)
Entering Data Into Memory
To enter Program 18 data
for RA, NR, DRA, PLA:
Part II: DIGITAL SYSTEM Programs
Complete the bin number (70-79
or 700-799), then enter the
telephone number, up to 32 digits
(when a number is longer than 16
digits, record digits 17-32 in the
next consecutive bin)
Y Y Y Y Y N N N
Enter the program mode.
1.
-Press # + dial SP + dial 5312 + press #.
Press key 18 (CONF key) to enter Program 18.
2.
Dial extension number, press #.
3.
Dial the abbreviation for the desired feature, press #.
4.
-The Line keys you can program light steadily or
flash. Steady means the feature is disabled,
flashing means it is enabled.
Store a line as follows: Dial a line number or press a lit
5.
Line key.
To change or enter data: Dial data (Y[es] or N[o]),
6.
press #.
Repeat steps 5-6 for all lines.
7.
Select an option:
8.
To program another feature: Press SAVE and go to
step 4 (in a Program 18 procedure).
OR
To program another extension: Press SAVE twice, dial
Y, and go to step 3 (in any Program 18 procedure).
OR
To exit Program 18: Press SAVE three times.
OR
To exit the program mode: Press SAVE four times.
-To enter another program after exiting: Press its
key.
Enter this data . . .
0 1 8 5 3 I 1 7 ( D )
267
Advertisement
Table of Contents
