Nitsuko Digital System DS Administrator's Manual page 237

System Options
To use the 1 + NXX, NNX,
or NPA Tables when you
see "ADD-DELETE-LIST"
on the display:
To use the 6-Digit
Analysis Tables when you
see ADD-DELETE-LIST on
the display:
Part II: DIGITAL SYSTEM Programs
Program 6: Toll Restriction
Select an option:
8.
To program another toll level: Go to step 5.
OR
To exit Program 6: Press SAVE once.
OR
To exit the program mode: Press SAVE twice.
-To enter another program after exiting: Press its
key.
Dial A for ADD, D for DELETE, or L for LIST.
1.
OR
Press # to exit the table and go to step 6 in the first pro-
cedure.
-If you list, you see four codes at a time.
To add/delete codes: Dial them.
2.
OR
To list more codes or exit at the end of the list: Press #
and go to step 1 in this procedure.
-Step 3 does not apply to listing.
To save changes and exit the table: Press # and go to
3.
step 6 in the first procedure.
OR
To save changes and return to "ADD-DELETE-LIST":
Press SAVE and go to step 1 in this procedure.
Dial A for ADD, D for DELETE, or L for LIST.
1.
OR
Press # to exit the table (and the program).
Dial the area code intended for 6-digit analysis.
2.
-If you selected "listing" in step 1, you see the codes
now, four at a time. To see more codes or exit at the
end of the list: Press # and return to step 1 in this
procedure. Steps 3-6 do not apply to listing.
Dial A for an Allow Table of NXX codes.
3.
OR
Dial D for a Deny Table of NXX codes.
Dial codes to be added or deleted.
4.
Select an option:
5.
To save changes and go to "ADD-DELETE-LIST" for
another area code: Press SAVE and go to step 1 in this
procedure.
OR
To save changes and exit the toll level: Press # and go
to step 6 in the first procedure.
OR
To save and exit Program 6: Press SAVE three times.
OR
To save and exit the program mode: Press SAVE four
times.
221