Nitsuko Digital System DS Administrator's Manual page 277

Extension Options Program 18: Extension Features (I)
Understanding Related Programming
For Class of Service:
Program 1
For Privacy Release Groups:
Program 16
Program 17
For DSS/BLF:
Program 18 (II)
For Line Dial-Up:
Program 16
For Page Zones:
Program 18 (II)
For Speed Dial Blocks:
Program 3
For Voice Mail (VX):
Program 14
Program 3
Program 19
Program 12
Program 17
Program 16
For a Dataset extension:
Program 14
Part II: DIGITAL SYSTEM Programs
To set up a Class of Service
To give an extension outgoing access to the lines intended
for Privacy Release
To assign a Privacy Release line to a key at an extension
To determine which extensions the DSS keys call
To give an extension outgoing access to lines
To enable/disable incoming pages at an extension
To select the number of System Speed Dial numbers
To assign an ASI circuit type (51) to each extension
intended for VX
To install VX and select a VX master number from the
ones selected in Program 18 (I)
To set up the following UCD Hunt Group:
(a) Hunt Type = 05
(b) Master Extension = VX master number selected in
Program 3
(c) Overflow Extension = Operator extension
assigned to VX master extension in Program 18 (I)
(d) UCD Members = VX extensions selected in
Program 18
To directly terminate each line the Automated Attendant
should answer to the VX master number selected in
Program 3
To assign a Record key to an extension
To assign to each Voice Mail port (selected in Program
14) outgoing access to the lines used by the VX's
Message Notification and Message Reminder features.
To program the accompanying Data Module with the
correct circuit type
261