Nitsuko Digital System DS Administrator's Manual page 285

Extension Options Program 18: Extension Features (II)
To enter Program 18 data
for SD:
Part II: DIGITAL SYSTEM Programs
Enter the program mode.
1.
-Press # + dial SP + dial 5312 + press #.
Press key 18 (CONF key) to enter Program 18.
2.
Dial extension number, press #.
3.
-For System Speed Dial, dial the number of the
extension you are programming from.
Dial SD, press #.
4.
Press a lit One-Touch Personal Speed Dial key or (Dial
5.
Personal bins 50-59 or 20-29, press #).
OR
Dial System Speed Dial bin, press #.
-You make One-Touch Speed Dial keys using
Program 17.
If you can store a name:
6.
Enter a name, press #. Or, just press # to not store a
name and go to step 7.
OR
If you cannot store a name, go to step 7.
To enter a letter, number, blank:
-Press dial pad button that has desired character.
Zero button= blank, Q, Z, (in that order).
-Dial digit (1, 2, 3) = letter's position on button
(e.g., dial 1 for 1st letter),
OR
Dial 4 for the button's number.
-To erase last char., press LAST.
Dial a line (01-16) or press a Line key or dial a group
7.
90-98 (if your system has line groups).
-Fast busy tone means: Go to step 4, select another
line in step 7.
-To store Intercom feature codes: Press ICM in step
7, dial codes in step 8.
To accept the displayed data: Press #.
8.
OR
To change or enter data: Dial telephone number data,
press #.
-Numbers longer than 16 digits automatically flow
to the next bin.
-To enter a pause, press HOLD.
-To enter a Flash, press MSG, or to enter a Delay,
press DIAL. These options are only available with
software versions AUX Module 02.10/Base 02.00
and higher.
-To enter *: DIAL + dial *.
-To enter #: DIAL + dial #
-To erase a data entry before you press #: Dial *.
269