Table of Contents
Advertisement
Program 15
Program 18(I)
Program 14
Program 3
To change the first digit of extension numbers, the digit that forces Intercom calls to
ring, or the single digit that calls the operator, see Flexible Numbering Plan on page
86.
Part I: DIGITAL SYSTEM Features
must be programmed for voice-announced Intercom calls
in Program 2.
To assign program access level 3-5 (PGM ACC LEVEL
= 03-05 + #) to extensions so they can enable/disable
voice-announced Intercom calls themselves
To assign an attendant to an extension (SO + # +
Extension + #). This is the attendant that gets called when
the extension user dials 0.
To assign extension numbers to ports (STN PORT nn =
300-323 + #) and to assign the correct circuit type to an
extension port (CIRCUIT TYPE = 00 [ESL], 01 [MB] or
02 [MB Display])
To program a name for an extension (refer to extension
name programming on page 242). Display Phone users
see this name in displays instead of the extension's
number.
To assign the number of attendants (operators) in the
system (NO. OF OPRS = 01-04 + #) and to assign their
extension numbers (OPR nn EXT = Extension + #)
Intercom
105
Advertisement
Table of Contents
