Nitsuko DS2000 Quick Reference Manual

Multibutton telephone
Hide thumbs Also See for DS2000:

Advertisement

Using Your Telephone

Due to the flexibility built into the system,
your
dialing codes
may differ from
those in this guide. Check with your
communications manager and make a note
of any differences.
The
Alphanumeric Display
helps you use
features and tells you about your calls. It may
also show your caller's name and number.
Soft Keys
simplify using your phone. To
guide you through your features, the Soft
Key functions automatically change to help
you handle calls. See the DS2000 Soft Key
Glossary for more.
If you're on a Handsfree call (see
Handsfree Options below), lift the
handset
for privacy.
MW
flashes when you have Messages
Waiting. If you have Voice Mail, it flashes
when you have Voice Mail messages left in
your mailbox.
LND
Press a line key then
to automatically
redial the last outside number you called.
Volume Controls
The
are for speaker
and handset. They also control the volume
for ringing calls and pages. While on-hook,
these keys are for
Contrast
Control.
Ring/Message Lamp
:
The
Flashes slow
(green) while a call rings your phone.
Flashes fast (red) if you have new Voice Mail messages
or unanswered Message Waiting.
22-Button Display Telephone Shown
CLEAR
BIN 1
BIN 2
CHECK
BIN 6
BIN 7
LINE 1
LINE 2
LINE 3
LINE 7
LINE 8
LINE 9
ABC
1
2
GHI
JKL
4
5
PQRS
TUV
7
8
OPER
0
VOL
Handsfree
Automatic
With
Normally, you have Automatic Handsfree.
Use
Handsfree Answerback
toward your phone — without lifting the handset.
Press
Bin Key
bins 701-710. Press
Personal Speed Dial bins 711-720.
These are
Your key assignments may be different than
shown — ask your communications manager.
If you are an attendant . . .
Key 11 is a Night Key to put your system in
the night mode.
Key 12 (on 22-button telephone) or key 24
(on 34-button telephone) is an Operator Call
Key for your incoming Intercom calls.
BIN 3
BIN 4
BIN 5
BIN 8
BIN 9
BIN 10
ICM
Press
Enable
Do Not Disturb
LINE 4
LINE 5
LINE 6
when you don't want to be interrupted.
LINE 10
LINE 11
LINE 12
The
Microphone
Handsfree calls. Press
microphone.
DEF
MW
ICM
3
MNO
MNO
FLASH
DND
6
Press
handset instead. See Handsfree Options below.
WXYZ
DIAL
MIC
9
While on a handset call, press
LND
SPK
not hang up) for
CONF
HOLD
While on a call, press
Conference.
Handsfree Options
lets you place and answer calls by pressing
Handsfree, you can press a line key without lifting the handset.
to answer a voice-announced Intercom call by speaking
1-10 for Personal Speed Dial
DIAL
+
Bin Key
1-10 for
and/or
keys.
to place an Intercom call.
to block your calls
picks up your voice for
MIC
to turn off the
for
Handsfree
calls, or use the
SPK
twice (do
Group
Listen.
CONF
to set up a
instead of using the handset.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nitsuko DS2000

  • Page 1: Using Your Telephone

    Key functions automatically change to help CHECK BIN 6 BIN 7 BIN 8 BIN 9 BIN 10 you handle calls. See the DS2000 Soft Key Press to place an Intercom call. Glossary for more. Enable Do Not Disturb to block your calls...
  • Page 2: Placing Calls

    telemanuals.com Placing Calls Placing an Outside Call . . . If your call doesn’t go through . . . Press a line/loop key 1. (Optional) Lift handset. Camp On and Callback for quick access: + Wait for dial tone + Dial number. 1.
  • Page 3: Answering Calls

    Answering Calls Answering Outside Calls . . . Quick Reference for Other Features Dial Number Do not lift handset + Dial + Dial outside number + Press line key to dial If you hear ringing and or lift handset. the displayed number. Preview: •...
  • Page 4: Send The Call You're On To A Co-Worker

    Handling Your Calls User Programmable Features Your call can wait at your phone . . . To program a feature, press and the feature’s code. For example, to enable incoming Paging, press and dial V P Y then to hang up. The underlined codes (e.g., #RC) are for systems prior to 02.00.00. Hold Feature Mnemonic...
  • Page 5: Placing Calls Quickly

    Placing Calls Quickly Quickly dial co-workers and outside calls . . . Park a call in orbit (Cont’d) Speed Dial To retrieve a call from or lift handset. system orbit: + System Park Orbit (60-69). To store Personal • In some systems you may have to press Speed Dial numbers (Intercom codes or and dial...
  • Page 6 telemanuals.com Speed Dial (Cont’d) For one-touch access 1. Press Bin Key for Personal Speed Dial to your stored Speed bins 1-10. Dial numbers: Press DIAL plus BIN KEY for Personal Speed Dial bins 11-20. Press Programmable Function Key assigned to Personal or System Speed Dial bin.

Table of Contents