Table of Contents
Advertisement
Program 3: System Features
Entering Data Into Memory
To enter Program 3 data:
Understanding Related Programming
For attendant (operator):
Program 1
For Side Tone Test Digit:
Program 10
For Voice Mail (VX):
Program 14
Program 18 (I)
Program 19
Program 12
208
Enter program mode.
1.
-Press # + dial SP + dial 5312 + press #.
Press key 3 to enter Program 3.
2.
To accept the displayed data: Press #.
3.
OR
To change or enter data: Dial data, press #.
-To erase data before pressing #: Dial *.
Repeat step 3 for all data.
4.
-If you finish and do not see, "SAVE TO EXIT":
Press SAVE before step 5.
Select an option:
5.
To select another program: Press its key.
OR
To exit the program mode: Press SAVE once.
To customize the attendant Class of Service 00
To manually assign the proper Class of Service (COS) to
an extension when you change it from an attendant phone
to a non-attendant phone. Non-attendant phones use COS
01-27.
To activate Side Tone test
To assign an ASI circuit type (51) to each extension port
intended for VX
To assign the VX feature to each VX extension, selected
in Program 14
To set up a UCD Hunt Group with the following
characteristics:
(a) Hunt Type = 05
(b) Master Extension = VX master extension selected in
Program 3
(c) Overflow Extension = Operator extension assigned to
the VX master extension in Program 18 (I)
(d) UCD Members = VX extensions selected in
Program 18
To directly terminate each line the Automated Attendant
should answer to the VX master extension selected in
Program 3
DIGITAL SYSTEM Administrator's Guide
System Options
Advertisement
Table of Contents
