Telephone Operation Telephone Operation; Line Indicators; Making And Ending A Call - VTech UP416 User Manual

Telephone operation
Telephone operation
The telephone comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting,
see Prime line on page 31 for details. When you answer a call, the telephone
automatically selects the ringing line.

Line indicators

Each of the four indicators on LINE 1-LINE 4 indicate
the state of the corresponding telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes rapidly when there is an incoming call on
the corresponding line.

Making and ending a call

To make a call using the console:
Lift the handset or press SPEAKER
1.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
2. Wait for a dial tone, then enter the telephone number.
The screen displays the elapsed time as you talk
(in hours, minutes and seconds).
To end a call using the console:
• Place the handset on the console to hang up.
-OR-
Press the corresponding line key (LINE 1-LINE 4).
•
-OR-
If you are using the speakerphone, press SPEAKER
•
NOTE: The elapsed time is not affected by accessing services from your telephone
service provider.
.
48
L1 PRIV
Line 1 00:00:01
to hang up.