Related Manuals for VTech CS6929
Summary of Contents for VTech CS6929
- Page 1 CS6929 Go to www.vtechcanada.com CS6929-2 for the latest VTech product CS6929-26 news. CS6929-3 CS6929-4 DECT 6.0 cordless telephone User’s manual (Canada version)
- Page 2 Do not use liquid or aerosol cleaners. Use a For support, shopping, and everything damp cloth for cleaning. new at VTech, visit our website at Do not use this product near water www.vtechcanada.com. such as near a bath tub, wash bowl,...
-
Page 3: Save These Instructions
supply in your home or office, consult • If the product has been dropped your dealer or local power company. and the telephone base and/or handset has been damaged. Do not allow anything to rest on the power cord. Do not install this •... -
Page 4: Implanted Cardiac Pacemakers
Battery convenient create some limitations. Telephone calls are transmitted • CAUTION: Use Only Supplied between the telephone base and the Battery. cordless handset by radio waves, • Do not dispose of the battery in a fire. so there is a possibility that the Check with local waste management cordless telephone conversations codes for special disposal instructions. -
Page 5: Table Of Contents
Table of contents What’s in the box......1 Redial list ........15 Review a redial list entry ....15 Overview ........2 Dial a redial list entry ......15 Handset overview .......2 Delete a redial list entry ....15 Telephone base overview ....3 Multiple handset use ....15 Charger overview .......4 Display icons overview .......4 Intercom ...........15... - Page 6 About the built-in answering Using your built-in answering system and voicemail service ... 25 system and voicemail service ...32 Set your built-in answering Retrieve voicemail from system ........25 telephone service ....32 Turn the answering system on or off ... 25 Retrieve voicemail ......32 Set voice language ......26 Set your voicemail number ....32...
-
Page 7: What's In The Box
NOTE To purchase replacement batteries or power adapters, visit our website at www.vtechcanada.com or call 1 (800) 267-7377. 1 set for CS6929 2 sets for CS6929-2/CS6929-26 3 sets for CS6929-3 4 sets for CS6929-4 1 set for CS6929-2/CS6929-26 1 set for CS6929/CS6929-2/CS6929-26/... -
Page 8: Overview
Overview 5 – • Press repeatedly to show other dialing options when reviewing a Handset overview caller ID log entry. 6 – • Press to start an intercom conversation or transfer a call (for multi-handset models only). 7 – Microphone 8 –... -
Page 9: Telephone Base Overview
Telephone base overview 14 – • Press repeatedly to review the redial list. • Press and hold to insert a dialing pause while entering a number. 15 – • Review the phonebook when the phone is not in use. • Increase the listening volume during a call. -
Page 10: Charger Overview
Display icons overview 6 – • Press to turn the answering system on or off. The battery icon flashes when the battery is low 7 – and needs charging. • Press to page all system The battery icon animates handsets. when the battery is 8 –... -
Page 11: Handset And Telephone Base Lights Overview
Handset and Telephone base lights overview Handset lights On when the handset speakerphone is in use. On when the handset is charging in the telephone base or handset charger. Telephone base lights On when the telephone line is in use. On when you are registering a handset. -
Page 12: Connect
Connect Mount the telephone base You can choose to connect the telephone Connect the telephone line cord to base for desktop usage or wall mounting. the telephone base. Route it through the wall mount bracket, and then NOTES connect it to the wall jack. •... -
Page 13: Install And Charge The Battery
Install and charge the battery 3. Align and place the telephone base on the wall mount bracket. Slide it down Install the battery as shown below. until it clicks securely in place. NOTES • Use only the battery provided. • Charge the battery provided with this product only in accordance with the instructions and limitations specified in this... -
Page 14: Charge The Battery
Charge the battery When it is fully charged, you can expect the following performance: Place the handset in the telephone base or the charger to charge. Operation Operating time While in handset Seven hours use (talking*) While in Three and a half speakerphone mode hours (talking*) -
Page 15: Before Use
Before use Check for dial tone Press . If you hear a dial tone, the After you install your telephone or installation is successful. power returns following a power outage, the handset will prompt you to set If you do not hear a dial tone: the date and time, and the answering •... -
Page 16: Configure Your Telephone
Configure your telephone Set date and time NOTE Using the handset menu • Make sure you set the date and time Press MENU when the phone is not including the year correctly; otherwise the answering system does not announce the in use. -
Page 17: Home Area Code
Home area code Dial mode If you dial your local calls using only The dial mode is preset to touch-tone seven digits (area code not required), dialing. If you have pulse (rotary) you can program your home area code service, you need to change the dial so that when you receive a call within mode to pulse dialing before using the your local area, the telephone number... -
Page 18: Telephone Operations
Telephone Operations Make a call Press on the handset. When you hear a dial tone, dial the Handset control key panel: number. The handset displays Unable to • call if the telephone line is in use. NOTES • The handset shows the elapsed time as you talk (in hours, minutes and seconds). -
Page 19: Volume
Volume Call waiting During a call, press When you subscribe to call waiting /VOLUME/ adjust the listening volume. service with your telephone service provider, you hear an alert tone if there NOTES is an incoming call while you are on •... -
Page 20: Find Handset
To access a number from the -OR- phonebook while on a call: • Place the handset in the telephone base or charger. Press MENU. Press SELECT to select Phonebook. NOTES Press MUTE to turn off the ringer of Press to scroll to the desired •... -
Page 21: Redial List
Redial list Multiple handset use Each handset stores the last Intercom 10 telephone numbers dialed. Entries Use the intercom feature for are shown in reverse chronological conversations between two handsets. order. When there are already Your telephone base supports up to 10 entries, the oldest entry is deleted to five handsets. -
Page 22: Answer An Incoming Call During An Intercom Call
• You can use four handsets on two pairs NOTES of intercom calls. For example, when four • To cancel the intercom call before it is handsets are used on two pairs of intercom answered, press OFF, or INT on your calls, use the fifth handset for an outside handset. -
Page 23: Phonebook
Phonebook Press SELECT to save. You hear a confirmation tone and then the The phonebook can store up to handset returns to the previous 50 entries, which are shared by all menu. handsets. Each entry may consist of a While entering names and numbers, telephone number up to 30 digits, and a you can: name up to 15 characters. -
Page 24: Alphabetical Search
Alphabetical search Dial a phonebook entry Follow the steps in Review the Search for the desired entry in phonebook entries to enter the the phonebook (see Review the phonebook entries or Alphabetical phonebook. search). Use the dialing keys to enter the letter associated with the name. -
Page 25: Caller Id
Caller ID -OR- Press MENU when the phone is not If you subscribe to caller ID service, in use. information about each caller appears to scroll to Caller ID Press after the first or second ring. If log, and then press SELECT twice you answer a call before the caller to choose Review. -
Page 26: View Dialing Options
If you do not want to review the missed NOTE calls one by one, press and hold • If you have programmed the home area CANCEL on the handset when not in code, only the last seven digits of the incoming phone numbers from that area use to clear the missed call indicator. -
Page 27: Delete The Caller Id Log Entries
Call block NOTE • If you save an entry which already exists If you have subscribed to caller ID phonebook in the , the handset displays service, you can set the telephone Number repeated and then returns to to block unknown calls and certain previous screen. -
Page 28: Review Call Block List
Edit a call block list entry -OR- Copy a number from the redial list Search for the desired call block entry by pressing REDIAL. Then press , (see Review call block list). , or REDIAL repeatedly to find the When the desired entry displays, desired number. -
Page 29: Sound Settings
Sound settings Handset ringer volume You can set the ringer volume or turn Key tone the ringer off on each handset. When You can turn the key tone on or off for the ringer is off, appears on the each handset. If you turn the key tone screen. -
Page 30: Temporary Ringer Silencing
Temporary ringer silencing To turn off the quiet mode: • Press and hold when the When the telephone is ringing, you can handset is not in use. The handset temporarily silence the ringer of the displays Quiet mode off briefly and handset and telephone base without then returns to idle. -
Page 31: About The Built-In Answering System And Voicemail Service
About the built-in Set your built-in answering answering system and system voicemail service The answering system can record and store up to 99 messages. Each For message recording, your telephone message can be up to three minutes in has a built-in answering system, and it length. -
Page 32: Set Voice Language
To turn on or off with the Default announcement telephone base: The telephone is preset with a greeting Press /ANS ON/OFF to turn the that answers calls with “Hello, please • leave a message after the tone.” You built-in answering system on or can use this preset announcement, or off. -
Page 33: Delete Your Announcement
Delete your announcement to choose 2, 3, 4, 5, 6 or Press Toll saver, and then press SELECT. Press MENU when the phone is not You hear a confirmation tone. in use. to scroll to Answering Press Turn the call screening on sys, and then press SELECT. -
Page 34: Voice Guide
Using your built-in answering NOTES • The answering system must be turned on system for the message alert tone to be functional. New message indication • Press any key on the telephone base (except /FIND HANDSET) to temporarily The message window in the telephone silence the message alert tone. -
Page 35: Message Playback
Message playback • Press 3 to delete the playing message. If you have new messages, the Press OFF to stop the playback. • telephone plays only the new messages • Press to switch between (oldest first). If there are no new speakerphone and the handset messages, the telephone plays back all earpiece. -
Page 36: Remote Access
Remote access NOTES • If you do not press any keys after you A two-digit security code is required to enter the remote access code, all new access the answering system remotely messages play. If there are no new from any touch-tone telephone. The messages, all old messages play. -
Page 37: Call Intercept
Options while a message is being Record, play, and delete recorded: memos • Press /VOL/ to adjust the call Memos are your own recorded screening volume. messages used as reminders for Press /VOL/ • to temporarily turn yourself or others using the same on the call screening if the call answering system. -
Page 38: Using Your Built-In Answering System And Voicemail Service
Using your built-in Retrieve voicemail from answering system and telephone service voicemail service Voicemail is a feature available from most telephone service providers. It You can use your answering system and may be included with your telephone voicemail service together by setting service, or may be optional. -
Page 39: Turn Off The New Voicemail Indicators
Expand your telephone Turn off the new voicemail indicators system If you have retrieved your voicemail You can add new handsets (CS6909), while away from home, and the cordless headsets (IS6100) or handset still displays the new voicemail speakerphones (MA3222 or AT&T indicators, use this feature to turn off the TL80133) to your telephone system. -
Page 40: Screen Messages
Screen messages There are new voicemail message(s) voicemail from your telephone You are calling Calling HS X service provider. another handset (for (for models with two intercom calls). or more You place the handset No battery handsets only) in the telephone base or charger without You have just ended Ended... - Page 41 The answering There are new Rec mem full XX new system has no messages in the messages recording time left. answering system. The phonebook is full. All system handsets ** Paging ** You cannot save any are being paged. new entry unless you delete some current entries.
-
Page 42: Frequently Asked Questions
Frequently asked I cannot dial Make sure there is a dial out. tone before dialing. It questions is normal if the handset takes a second or two Below are the questions most frequently to synchronize with the telephone base before asked about the cordless telephone. - Page 43 My handset Move the handset closer There is The handset may be out beeps and is to the telephone base. It interference of range. Move it closer not performing may be out of range. during a to the telephone base. normally.
- Page 44 The telephone Caller ID is a subscription The answering Make sure the answering does not service. You must system does system is on. When the receive caller subscribe to this service not record answering system is on, ID or the from your telephone ANS ON should display messages.
-
Page 45: Eco Mode
ECO mode General product care Taking care of your telephone This power conserving technology Your cordless telephone contains reduces power consumption for optimal sophisticated electronic parts, so it must battery performance. The ECO mode be treated with care. activates automatically whenever the handset is synchronized with the Avoid rough treatment telephone base. -
Page 46: The Rbrc ® Seal
FCC, ACTA and IC regulations ® The RBRC seal on the nickel-metal hydride battery indicates that VTech FCC Part 15 Communications, Inc. is voluntarily This equipment has been tested and participating in an industry program to found to comply with the requirements... -
Page 47: Fcc Part 68 And Acta
and (2) this device must accept any connecting to a single line and an RJ14 jack for two lines. See the installation interference received, including instructions in the user’s manual. interference that may cause undesired operation. Privacy of communications The Ringer Equivalence Number (REN) may not be ensured when using this is used to determine how many devices you may connect to your telephone... -
Page 48: Limited Warranty
United States of America such as early morning or late evening. and Canada. Industry Canada What will VTech do if the Product is not free from defects in materials This device complies with Industry and workmanship during the Canada license-exempt RSS limited warranty period (“Materially... - Page 49 Product that has been subjected the Product(s) to the service location. to misuse, accident, shipping or VTech will return repaired or replaced other physical damage, improper Product under this limited warranty. installation, abnormal operation or...
-
Page 50: Technical Specifications
Memory Phonebook: so the above limitation may not apply to you. In no event shall VTech be liable 50 memory locations; for any indirect, special, incidental, up to 30 digits and consequential, or similar damages... - Page 51 And your life. VTech Technologies Canada Ltd. A member of THE VTECH GROUP OF COMPANIES. VTech is a registered trademark of VTech Holdings Limited. Specifications are subject to change without notice. Copyright © 2015 for VTech Technologies Canada Ltd. All rights reserved. 03/15. CS6929-X_CA_WEBCIB_V1.0...
Need help?
Do you have a question about the CS6929 and is the answer not in the manual?
Questions and answers
When making a call and after connected we cannot push 1,2 or 3 etc to get a person so is there a button we need to push
at times ring is continuous but no one is on the line, no caller ID, no missed call data
The VTech CS6929 phone may ring continuously with no caller ID or missed call data because it is receiving calls from numbers with no caller ID. If call blocking is not enabled for unknown numbers, these calls may still cause the phone to ring. Additionally, if the call recipient does not answer during the first ring, the call is disconnected without saving caller ID or missed call information.
This answer is automatically generated