Answering System Setup; Remote Access Code; Message Date/Time - VTech UP416 User Manual

Answering system

Answering system setup

All feature settings below apply to both central (auto attendant) and
private mailboxes.

Remote access code

Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 333 by default.
When the console is idle, press ANS SYS.
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
The screen displays Remote Code. Use the dialing
4.
keys to enter a three-digit remote code.
Press DELETE to delete a digit.
•
Press /REPEAT or /SKIP to move the cursor to
•
the left or right.
SELECT to save the setting and return to
5. Press MENU/
the previous menu. To exit without making changes,
press CANCEL.

Message date/time

The message date and time is set to Announce by
default. During message playback, you hear the date
and time the message was received. You can change
this setting to skip the date and time information.
When the console is idle, press ANS SYS.
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
SELECT to save the setting and return to
5. Press MENU/
the previous menu. To exit without making changes,
press CANCEL.
to scroll to Ans Sys Setup, then press
to scroll to Remote Code, then press
to scroll to Ans Sys Setup, then press
to scroll to Msg Date/Time, then press
to choose Announce or Skip.
93
Ans Sys Setup
>Remote Code
Msg Date/Time
Message Alert
Message Length
Call Screening
Remote Code
333_
Ans Sys Setup
Remote Code
>Msg Date/Time
Message Alert
Message Length
Call Screening
Msg Date/Time
>Announce
Skip