Adding And Registering A Cordless Handset; To Register An Up407 Cordless Handset To Your Up416 Console - VTech UP416 User Manual

Getting started

Adding and registering a cordless handset

You can add a cordless handset (UP407, purchased separately) to your
console. The cordless handset must be registered with the UP416 console
before use. When first purchased, the handset shows Choose Handset in
Registration at base menu. Put handset on cradle to register.
Make sure the cordless handset is properly installed before you begin
registration. Refer to the user's manual of the cordless handset for details. If the
handset does not have enough power to proceed with the registration, you need
to charge the new handset for at least five minutes.

To register an UP407 cordless handset to your UP416 console

NOTE: Register each cordless handset or headset separately.
1. Make sure the cordless handset is out of the
charger and the screen shows Choose Handset in
Registration at base menu. Put handset on cradle
to register.
On the UP416 console, press MENU
2.
3. Press or
SELECT or /SKIP.
MENU/
SELECT again or press /SKIP to select
4. Press MENU/
Handset. The console screen shows Registering
handset... (Put handset on cradle to start).
5. Place the unregistered cordless handset into the
charger. The handset screen displays Registering...
Please wait. The handset beeps once and begins
registering to the UP416 console. It takes up to
60 seconds to complete the registration. The
UP416 console shows Handset registered and
the handset shows Ext Handset. To change the
handset name and the extension number shown on
the handset screen, refer to the Phone rename and
Extension no. sections in the user's manual of the
cordless handset.
If the registration is not successful, the UP416 console
screen returns to the previous screen. Wait for about
two minutes, then try the registration process again with
step 1.
to scroll to Registration and press
/SELECT.
25
Ringers
Set Date/time
One Touch
Phone Settings
System Setup
>Registration
Customer Support
Registration
>Handset
DECT Headset
Deregistration
Registering
handset...
(Put handset on
cradle to start)