Dial Mode; Call Privacy - VTech UP416 User Manual

Telephone settings
Telephone setup

Dial mode

The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
When the console is idle, press MENU
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
SELECT or /SKIP to save the setting
5. Press
MENU/
and return to the previous menu. To exit without
making changes, press CANCEL or /REPEAT.

Call privacy

The call privacy is set to Off by default. The console allows other extensions
to join a call in progress. You can turn this setting on to ensure that only one
device uses a line at a time.
To turn this feature on or off:
When the console is idle, press MENU
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
SELECT or /SKIP to save the setting
5. Press
MENU/
and return to the previous menu. To exit without
making changes, press CANCEL or /REPEAT.
NOTE: To temporarily change the call privacy setting during a call,
see page 52 .
to scroll to Phone Settings, then press
to scroll to Tone/Pulse, then press
to choose Tone or Pulse.
to scroll to Phone Settings, then press
to scroll to Call Privacy, then press
to scroll to On or Off.
.
/SELECT
/SELECT .
44
Phone Settings
LCD Language
Home area code
Key Tone
LCD Contrast
>Tone/Pulse
Call Privacy
Tone/Pulse
>Tone
Pulse
Phone Settings
LCD Language
Home area code
Key Tone
LCD Contrast
Tone/Pulse
>Call Privacy
Call Privacy
On
>Off