One Touch; Assign A One-Touch Entry - VTech UP416 User Manual

Telephone operation

One touch

This telephone has 32 one- and two-touch memory locations (speed dial
locations) where you can store the phone numbers or system extension
numbers you wish to dial more quickly. You can store up to 30 digits in
each location.
You can access the first 16 locations using only the one-touch buttons. To
access the remaining 16 locations, press LOWER and then the one-touch
button for the desired location. You might wish to write the names, telephone
numbers, or extension numbers of the one-touch entries on the directory card,
using the light gray spaces for the upper 16 locations and the white spaces for
the lower 16 locations.

Assign a one-touch entry

Use the following steps to program the one-touch keys.
When the console is idle, press MENU
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
The screen displays Enter Number:
4.
5. Use the dialing keys to enter a telephone number
(up to 30 digits) or an extension number.
Press DELETE to delete a digit.
•
Press /REPEAT or /SKIP to move the cursor
•
to the left or right.
• You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press
SELECT. A P appears on the screen.
MENU/
• Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press
SELECT. A T appears on the screen. All
MENU/
numbers you enter after this will send touch-tone
signals during dialing.
to scroll to One Touch, then press
to scroll to Program, then press
to choose Add pause, then press
or
to choose Send tone, then press
or
/SELECT .
64
Ringers
Set Date/Time
>One Touch
Phone Settings
System Setup
Registration
Customer Support
One Touch
View
>Program
Enter Number:
18005959511_
Select to:
Done