VTech UP416 User Manual page 42

Getting started
System setup
Network setup (continued)
If you want to switch from Auto set IP to Set static IP, you have to disable the
Auto set IP setting first.
To disable Auto set IP:
When the console is idle, press MENU
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
SELECT or /SKIP.
MENU/
5. Press or
SELECT or /SKIP to save the setting. To exit
MENU/
without making changes, press CANCEL.
To enable Set static IP:
When the console is idle, press MENU
1.
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
SELECT or /SKIP.
MENU/
The screen displays Enter static IP. Use the dialing
5.
keys to enter a specific IP.
Press DELETE to delete a character.
•
Press # to add a dot.
•
Press /REPEAT or /SKIP to move the cursor to
•
the left or right.
When entering a specific IP, make sure the IP range is
not blocked by the Ethernet switch or router.
to scroll to System Setup, then press
to scroll to Network Setup, then press
to scroll to Auto set IP, then press
to scroll to No, then press
to scroll to System Setup, then press
to scroll to Network Setup, then press
to scroll to Set static IP, then press
.
/SELECT
.
/SELECT
34
Network Setup
>Auto set IP
Set static IP
Discovery method
Auto Set IP
Yes
>No
Network Setup
Auto set IP
>Set static IP
Discovery method
Enter static IP
192.168.1._
<'#' = Add dot>