Review Directory Entries - VTech UP416 User Manual

Directory
Create directory entries
Create a new directory entry (continued)
• You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or
SELECT. A P appears on the screen.
MENU/
• Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press or
SELECT. A T appears on the screen. All
MENU/
numbers you enter after this will send touch-tone
signals during dialing.
• You can store the flash signal required by some special services as part
of a dialing sequence. Press
SELECT. An F appears on the screen.
MENU/
5. Press or
making changes, press CANCEL, or press
SELECT.
press
MENU/

Review directory entries

When the console is idle, press DIRECTORY. The
1.
screen displays a summary with the number of
directory entries stored.
2. Press or
appear alphabetically by the first letter in the name.
Press CANCEL to cancel an operation and press
3.
CANCEL again to return to idle mode.
to choose Add pause, then press
to choose Send tone, then press
to scroll to Done, then press
to browse through the directory. Entries
to choose Add flash, then press
or
SELECT. To exit without
MENU/
or
70
Enter Number
8005959511_
Select to:
Done
to scroll to Cancel, then
Directory
XX entries
'MENU'=Add entry