Binary Output Status; Relay Element Status - Toshiba RSM 100 Instruction Manual

4.4.3

Binary Output Status

Click the [Binary output] tab, then the binary output status will be displayed on the [Binary output]
screen.
IO1 and IO2 show the binary input and output module and BO01 to BO12, FAIL and SBX show
the binary output relays mounted on each module.
The status OPEN means that the contact of the output relay is open, and the status CLOSE means
it is closed.
4.4.4

Relay Element Status

Click the [Element] tab, then the status of relay elements will be displayed on the [Element]
screen.
The phases of the elements are indicated with A, B, C, AB, BC and CA. The elements using zero
sequence current and/or voltage are indicated with N.
A phase in reverse order shows that the element is in the operating status.
Click or to display other pages.
⎯ 43 ⎯
6 F 2 S 0 7 1 5