Operation Of Setting Menu; On-Line Operation - Toshiba RSM 100 Instruction Manual

4.5 Operation of Setting Menu

4.5.1

On-line Operation

Click the [Setting chg.] button on the [Top menu] screen, then the setting data are extracted from
the relay and the following [Password] screen will appear.
To change the settings, enter the password and click the [OK] button. If the password is not
entered correctly, the following screen will appear.
To only view the settings, click the [Setting view] button. No password is required for viewing.
Note:
The setting [Sub-menu] screen will appear and the settings can be viewed or changed on each
sub-menu shown on the [Sub-menu] screen.
Note:
Depending on the relay types, the following menu screen will appear:
If the password is not entered correctly, both of the [Send] and [Send all] buttons do not
appear on the [Setting menu] screen and the new settings cannot be sent to the relay.
Setting, changing or canceling the password can be done only from the LCD of the
front panel of the relay.
⎯ 47 ⎯
6 F 2 S 0 7 1 5