■Setting Parameters for Analog Elements
This part describes how to set the parameters for analog elements in the element table of
waveform data.
《Note for Operation》
● You can not set the [Phase] and [Phase Group Number].
《Operating Procedure》
① Display the information of waveform data and click【Elements】button.
See (→■Displaying Information of Waveform Data) for the procedure to display the
information.
② [Elements] box is displayed.
Click the analog element for which you want to set the parameters.
⎯ 85 ⎯
6 F 2 S 0 7 1 5
1-9