Toshiba RSM 100 Instruction Manual page 51

Description
When printing the record data and setting data, the "Plant name" and "Description" entered on the
[Description] screen are attached to the printing outputs as shown below. It is recommended to
enter the substation name and line name where the relay is installed.
Setting
Relay Type: GRZ100-101A
Plant name: XXXX
Description: YYYY
Click the [Description] button to view or change the descriptions.
RSM communication (Communication)
If the relay is linked with RSM or IEC60870-5-103, etc., the address and protocol, etc. must be set.
Click the [RSM communication] ([Communication]) button on the [Setting menu] screen, then
the current address can be viewed or changed on the [RSM communication] ([Communication])
screen.
Date: 08/May/1998 11:58
Date and time in printing
Setting data
⎯ 50 ⎯
6 F 2 S 0 7 1 5
↑