Extracting, Displaying, Saving And Printing Relay Data - Toshiba RSM 100 Instruction Manual

4.2 Extracting, Displaying, Saving and Printing Relay Data

In the on-line operation, the data on record, status and setting can be extracted from the relay every
one second and displayed on the PC. Record and setting data can be saved in the PC and printed.
Status data are not saved as they change momentarily.
Record data
Click the [Record] button on the [Top menu] screen, then the data of fault records, event records,
and date and time of disturbance records will be displayed on the [Fault record], [Event record]
and [Disturbance] screens. The data are saved temporarily in the PC buffer memory along with the
setting data which are extracted not for display but for fault records.
To save the extracted fault or event record in the floppy disk or internal memory, click [Save as] on
the [File] menu of the fault or event record screen. Enter a file name in the [Save As] dialog box.
The data are saved with the following extensions:
• Record data, etc.: ____ .dat∗
• Setting data, etc.: ____ .set
The disturbance records are saved in the waveform analysis tool. (See "Saving Waveform Data" of
Appendix B, "Waveform Data Analysis" for details.)
Only the data of the waveform selected as the analysis target is saved at this time. Up to 16
waveforms can be saved at a time. If more data is to be recorded, reselect the data and save it using
the waveform analysis software.
To extract and display the disturbance records in oscillograph format, choose the date and time
and click the [Analysis] button on the [Disturbance] screen.
⎯ 29 ⎯
6 F 2 S 0 7 1 5