Zoom In And Out Locus Diagram - Toshiba RSM 100 Instruction Manual

3.3

Zoom In and Out Locus Diagram

This section describes how to zoom in and out the locus diagram.
《Note for Operation》
● The following operations are available.
《Operating Procedure》
① To zoom in the designated range, click [View], and then click [Zoom In Designated
3-6
・Zoom In Designated Range You can zoom in the designated range.
・Zoom In, Out
・Moving the center of
the coordinate axis
・Move to Center
・Normal
Range].
You can zoom in and out the locus diagram.
You can move the center of the coordinate axis.
You can move the center of the coordinate axis to
the center of the screen.
You can return the locus diagram to the status in
which the locus diagram is displayed for the first
time.
⎯ 154 ⎯
6 F 2 S 0 7 1 5