Structure Of Rsm100 Software - Toshiba RSM 100 Instruction Manual

2.7 Structure of RSM100 Software

The RSM100 software contains the following main functions:
• Communication between relay and PC
• Operation of program files
• Analysis of waveform data in disturbance record
The default of the file hierarchy is as follows:
C:\ Rsm100 \ ...
Note: (1) Folders used by other tool such as PLC tool, etc. may be produced.
\ [Temporary Folder]\
[Temporary Folder] is defined by the environmental variable.
for applications and disturbance records
\ dat for default data of fault records, event records and settings
__ .dat∗
__ .set∗
\ rcv for default data of disturbance records
__ .osc
\ help
\ ini for data depending on relay type and model
(2) The file beginning with "def-(ignore the case*)" must not be produced in dat folder.
It is highly recommended not to be produced user file in the folder of Program Files.
*: pass whether uppercase or lowercase letters.
(3) If changing the install place in Windows® Vista, refer to the caution of the "3. Installing
RSM100 Software".
for receiving data
⎯ 11 ⎯
6 F 2 S 0 7 1 5