Toshiba RSM 100 Instruction Manual page 26

6 F 2 S 0 7 1 5
Common Operation;
If on-line operation is chosen, when the PC is connected to the relay directly or via Ethernet LAN,
and if dial operation is chosen, when the PC is connected to the relay via telephone line, the
[Choose relay] dialog box will appear. The size of the dialog box can be changed to the required
size by dragging the sizing handle (↔) at a side of the dialog box.
When accessing from a local PC using an RS232C port on the front panel of the relay or Ethernet
LAN, the dialog box shows the address number and type-form of the relay with which the PC is
communicating. Click the [OK] button to proceed.
When accessing from a remote PC in the RSM, the dialog box shows the address number and
type-form of the relays that are connected to the RSM and are accessible from the PC. When once
clicking the item "Adr.", "TYPE", "Plant name" or "Description", the selected item is listed in
ascending order. When clicking the item once more, the selected item is listed in deascending
order. Choose a relay with which to communicate and click the [OK] button to proceed.
When connecting to the relay directly, [On-line] button and [Refresh] button are the same
meaning. The RSM sends for the type-form of the relay every time.
When connecting to the relay via the protocol converter and already acquiring the type-form of the
relays, the RSM shows the acquired type-form immediately by clicking [On-line] button. On the
other hand, the RSM sends for the type-form again even if it has acquired by clicking [Refresh]
button.
When connection between the PC and relay has been established, the [Top menu] screen will
appear. The relay access type is shown and five menu buttons, [Record], [Status], [Setting view],
[Setting chg.] and [Test], are displayed on the screen. The "Plant name/Description" of the
connected relay is displayed on the upper title bar of the screen as shown in the following screen.
⎯ 25 ⎯