Status Of Time Synchronization Source - Toshiba RSM 100 Instruction Manual

4.4.5

Status of Time Synchronization Source

Click the [Time] tab, then the status of external time synchronization sources such as IRIG-B, GPS
and RSM (remote setting and monitoring system) clock will be displayed on the [Time] screen.
The asterisk shows that the internal clock of the relay is synchronized with the marked source.
Click the [Clock adjustment] button, then the [Clock adjustment] screen will appear. The relay
internal clock can be adjusted as follows.
The time can be adjusted only when the relay clock is running locally.
Note:
Check that an asterisk (*) is not attached to any two of IRIG, RSM and GPS.
• The [Time set] screen shows the current date and time based on the internal clock of the PC.
The time halts at the time when the screen is displayed. Adjust the date and time as required.
• Click the [OK] button, then the internal clock of the relay is adjusted to the new date and time.
• The date and time on the status screen are for the internal clock of the relay. Check that they
reflect the new setting.
⎯ 44 ⎯
6 F 2 S 0 7 1 5