Toshiba RSM 100 Instruction Manual page 56

6 F 2 S 0 7 1 5
The available signals are listed in Appendix, "Signal List" of the relay manual.
It is also possible to attach a delayed drop-off time of 0.2 seconds to these signals. The delayed
drop-off time is disabled by the scheme switch [BOTD].
Click the [Binary output] button on the [Setting menu] screen, then the [Binary output] screen
will appear for every output relay. A logic gate can be applied, a delayed drop-off time can be
attached, and the signals driving the output relay can be viewed or changed.
Configurable LED
Some LEDs are user configurable. One of the signals listed in the "Signal List" can be assigned to
each LED. For the "Signal List", refer to the relay manual.
Click the [Configurable LED] button on the [Setting menu] screen, then the [Configurable LED]
screen will appear.
If an LED is not used, enter "0" or the default value will be assigned.
⎯ 55 ⎯