Toshiba RSM 100 Instruction Manual page 154

⑪ Click【OK】button.
･ The locus diagram is displayed with the parameter settings.
⑫ To dismiss the scale, click [Set], and then click [Display Division].
･ To display the scale, perform the same operation again.
⑬ To print the locus diagram, click [File], and then click [Print].
･ When you print the locus diagram, make the locus diagram screen fit within the main waveform analysis
screen.
⎯ 153 ⎯
6 F 2 S 0 7 1 5
3-5