Toshiba RSM 100 Instruction Manual page 87

③ Click【Edit】button.
④ Type the name of measurement location in [Equip. Name] text box.
⑤ Type the name of measurement element in [Elem. Name] text box.
⑥ Click the down arrow button that appears just to the right of [Color] drop-down list box
⑦ Type the amplitude of waveform at full scale in [Full Scale] text box.
⑧ Click the down arrow button that appears just to the right of [Unit] drop-down list box
⑨ Type the PT or CT ratio value in [PT, CT Ratio] text box.
1-10
･ [Edit Analog Element] dialog box is displayed.
･ You can enter up to 32 characters for a name of measurement location.
･ You can enter up to 12 characters for a name of measurement element.
and click the color in which you want display the waveform.
･ Type a value at full scale in the range between 0 and 100000(in increments of 0.001).
and select the unit of value at full scale.
･ Type a ratio value in the range between 1 and 65535(in increments of 1).
⎯ 86 ⎯
6 F 2 S 0 7 1 5