Table of Contents
Advertisement
10
Q. The saved waveform data file cannot be open.
A
Make sure the software version of the waveform data analysis. Open the file by the latest version. The
version can be checked with the [Help] menu.
11
A
Cannot print waveform data on setting the direction of paper to "width" in the [Print Waveform]
menu.
Q
This function is not supported. Depending on the printer, however, it is possible by the following
procedure.
(1) Click [File] → [Print] → [Print Waveform] and display the [Print Waveform] dialog box.
(2) Click [Print Setup] and display the [Print Setup] dialog box.
(3) Select the A3 for original size in page setting, and select the A4 for output paper size.
(4) Execute the print after setting the direction of paper to "width".
12
A
There is a difference between the number of characters of Signal name set on the "Setting" screen
between that of the name displayed as binary signal in Waveform.
Q
The name of binary signal can be displayed up to 12 characters. Therefore, it is recommended the
maximum 12 characters are set on the "Setting" screen.
⎯ 166 ⎯
6 F 2 S 0 7 1 5
Hide quick links:
Advertisement
Chapters
Table of Contents
