Toshiba RSM 100 Instruction Manual page 35

<GR∗∗∗∗-∗∗∗D model and G1IF4>
• Normal view screen (Default screen)
(4)
(5)
(1) Date and Time: Date and time that event occurred is displayed in the form of year,
month, day, hour, minute, second and millisecond.
(2) Message: Event message is displayed. (left aligned 22characters or less)
(3) Status: Status is displayed. (On or Off)
(4) Click the button to Main Menu screen.
(5) Click the [Update] button and confirmation message is displayed. Then click the [OK]
button and all of event records in the relay are read out.
(6) Columns and rows in sight are able to change by clicking the
scroll bar.
(7) Put the mouse pointer over the boundary of columns, then the
The column width is able to change by dragging the left click button on the mouse.
* Click [Date and Time], then display sequence of the data will switch. (the chronological
order of event(default condition)→descending order→ascending order→...)
▼ in descending or ▲ in ascending is displayed in the [Date and Time] column.
Display sequence of the data is back to default condition by updating, switching the tab
or switching between detail and normal view.
• Choose the [View – Detail View] menu, detail view screen is displayed and the check mark
is put alongside the [Detail View] menu. This menu is available on the event record screen
of GR∗∗∗∗-∗∗∗D model and G1IF4 only.
The view condition is stored after closing RSM100, previous view condition is displayed
on start-up. (The default screen is usual view screen.) In case of reinstall RSM100 after
uninstall, view screen is back to the default screen.
(1)
(2)
(6)
⎯ 34 ⎯
6 F 2 S 0 7 1 5
(3)
(7)
(6)
(6)
button or dragging the
pointer will appear.