Toshiba RSM 100 Instruction Manual page 95

② Double-click the position to where you want move the cursor.
③ The elapsed times from the beginning of the waveforms to the cursors are displayed
④ In addition, by using
1-18
･ The selected cursor(active cursor) moves to the position.
･ You can move the cursors by dragging them. By this operation, non-active cursor becomes active
automatically by dragging it.
in the bottom of the screen.
By using or button, you can move the cursor by 1 sample.
Cursor No.
or button, you can move the cursor by 1 cycle.
⎯ 94 ⎯
6 F 2 S 0 7 1 5